TM 5-3810-307-24-1-1
4.
Plug in new EPROM ensuring all 28 pins are
REPLACEMENT OF CHECKOUT KIT EPROM.
inserted straight into socket.
1.
Remove front cover, screws retaining bottom
cover, and slide pc boards completely out of
CAUTION
housing, refer to Figure 2-3-11.
Do not force any component. All pieces
reassemble with very minor effort.
2.
Carefully separate top pc board from center pc
Check for cause of difficulty and correct
board.
before forcing.
3.
Unplug EPROM from center pc board, refer to
5.
Install top pc board on center pc board.
6.
Slide pc boards into housing and secure
CAUTION
bottom cover.
Be sure to install the EPROM chip with
7.
Install front cover.
the notched end toward the center of the
board. Installing chip backwards will
destroy it.
2-3-26
