SM02-025-0
Page 68
2.
Install clutch piston inner seal and size as ex-
NOTE
plained in step 1.
Belleville washers in the 1st and 2nd
clutch are different than washers in the
forward and reverse clutch. 1st and 2nd
clutch washers have (4) four holes in
them (for identification only). Do not mix
1st and 2nd clutch washers with forward
and reverse washers,
5. Install the Belleville washers. First the washer
with large diameter goes toward the spacer. Alter-
nate seven (7) washers.
3.
Position the piston in the low clutch drum as
shown. Use caution as not to damage the inner and
outer piston sealing rings.
6.
Install the piston return spring retainer ring on
the clutch shaft.
4. Position the piston return spring spacer over the
clutch shaft.
