SM02-025-0
Page 69
9.
Install one steel disc.
NOTE
Be certain the retainer ring is in full posi-
tion in the ring groove.
7. Using a sleeve with the proper inner diameter,
drive the Belleville washer ring into position.
NOTE
The friction discs in the low clutch have a
higher co-efficient rating than the fric-
tion discs in the other clutches therefore
the discs must not be mixed. The low
clutch friction disc has a yellow mark of
8.
Position the ring retainer washer over the re-
nonsoluble paint on the outer diameter
tainer ring.
for permanent identification. Alternate
steel and friction discs until the proper
amount of discs are installed. First disc
next to the piston is steel, last disc in-
stalled is friction.
10.
Install one friction disc.