TM 5-3810-307-24-1-2
CAUTION
Be careful not to deform (oversize or stretch) the impact block
compression rings during removal, open just enough to slide impact block
compression rings over the diameter of the impact block.
CAUTION
Be careful not to deform (oversize or stretch) the piston compression
rings during removal, open just enough to slide piston compression rings
over the diameter of the piston.
CAUTION
Be careful not to damage any components while lowering the piston into
the upper cylinder. Do not rest any weight of the piston on the piston
compression rings.
Ensure the lifting pawl of the hammer trip assembly is disengaged,
hanging vertically, and not going to strike the piston nose and/or piston
compression rings when the piston is lowered into the upper cylinder.
CAUTION
Failure to finger tighten the two injector clamp capscrews prior to
tightening to final torque value may result in a deformed fuel injector.
K-4 Change-1
