TM 5-3810-307-24-1-2
Page
No.
SAFETY SUMMARY.......................................................................................................................
SYSTEM DESCRIPTION................................................................................................................
THEORY OF OPERATION.............................................................................................................
TROUBLESHOOTING....................................................................................................................
MAINTENANCE..............................................................................................................................
SAFETY SUMMARY
WARNING
Remain clear when removing the impact block from the lower cylinder in
the event the impact block falls from the sling.
WARNING
Installing the piston into the upper cylinder procedure presents several
opportunities for pinching body parts between moving parts. Use care
when lowering the piston into the upper cylinder.
WARNING
Ensure the pressure has been relieved on the remote throttle prior to
disconnecting the remote throttle hydraulic line.
CAUTION
Do not use any starting fluids as a starting aid as they can cause
excessive piston stroke and damage to the impact hammer.
CAUTION
When raising the impact hammer to a vertical position after performing
repair procedures, it is imperative to raise the impact hammer very slowly.
The piston and impact block must not be allowed to collide forcefully with
the striker plate. A violent collision may cause damage.
CAUTION
Position a piece of plywood (or other protective material) on the floor
beneath the impact block to prevent damage in the event any
components fall to the floor during lifting of the impact block.
