TM 5-3810-307-24-1-2
The special tools include the following:
Various hex keys
Grease gun with flex hose and fitting
Oil gun
Check valve extractor tool
Ring compressor
Piston ring pliers
Wood pile tongs
Crowbar
Steel bar with hickey (5-foot (1.5 m))
Cheater bar (36 x 2-inch (91 x 5 cm))
Ten-pound (4.5 kg) sledge hammer
Two-pound (0.9 kg) hammer
Axe
Vice grip
12-inch (30.5 cm) and 18-inch (46 cm) adjustable wrenches
1-5/16-inch combination wrench
1-1/8-inch combination wrench
1-5/16-inch box end wrench
1-1/8-inch box end wrench
Two-inch (5 cm) wood level
100-foot (30.5 m) fiberglass measuring tape
Pulley with 15-inch (38 cm) anchor bungee
36-inch (91 cm) peavey
The consumable materials include ten 14-oz. (400g) tubes of MIL-G-10924 grease, 1-quart (1 l) of MIL-
L-2105 oil, 1/3-oz. (10 ml) of Loctite 272, and Teflon tape.
The seal kits include a fuel pump seal kit, throttle valve (needle block) seal kit, and oil pump seal kit.
The spare filters include spare inline fuel filters, fuel filter element for the fuel filter assembly, and fuel/oil
tank suction strainer assemblies.
Various spare parts are also included in the tool boxes. Refer to Component End Item Section at the
end of Appendix H in the Operator's Manual TM 5-3810-307-10 for a complete listing of the spare parts.
K-16 Change-1