TM 5-3810-307-24-1-2
2
1
NOTE: THE STRIKER
PLATE AND STRIKER
3
PLATE CUSHION RING
REMAIN INSIDE THE
LOWER DRIVE HOUSING
LEGEND
1.
Lower Drive Housing
3.
Upper Drive Housing
2.
Upper to Lower Drive Housing Bolts,
3/4-10 NC x 2 LG SHCS
Figure K-15. Lower Drive Housing Installation
Direct Drive System Striker Plate and Striker Plate Cushion Ring. (Refer to Figure K-16.)
The striker plate and striker plate cushion ring are normally removed to inspect for wear and/or
replacement.
Removal.
a.
Remove the lower drive housing as an assembly from the upper drive housing and set
upright with the guide plate side down and rest on wood blocks (Page K-41).
b.
Remove the striker plate (1, Figure K-16) from the lower drive housing.
NOTE
A threaded hole in the side of the striker plate allows easy handling. The
threaded hole can be easily accessed by lowering the lower drive housing
onto wood blocks and raising the striker plate.
c.
Remove the striker plate cushion ring (2) from the lower drive housing.
K-42 Change-1
