TM 5-3810-307-24-2-1
Slide the pump shaft through the drive gear and
position the pump flange onto the mounting studs.
Push the pump forward until the mounting flange and
o-ring are properly fitted into the gear housing bore.
Use your fingers to tighten the capscrews for the
support bracket, if so equipped.
15 mm
Tighten the mounting nuts.
Tighten the capscrews for the rear support bracket.
Torque Value:
44 Nm [32 ft-lb]
Mounting Nuts
24 Nm [18 ft-lb]
Support Bracket
A-42 C-1
