TM 5-3810-307-24-2-2
CAUTION
Do not crank the starting motor for periods
longer than 30 seconds. Excessive heat will
damage the starting motor.
Crank the engine until the oil pressure gauge
indicates system pressure.
NOTE
Allow two minutes between the 30-second
cranking periods so the starting motor can
cool.
NOTE
If pressure is not indicated, find and correct
the problem before continuing.
Allow the lubricating oil to drain into the oil pan, and
measure the oil level with the dipstick.
Add oil as necessary to bring the level to the high
level mark.
Lubricate the gasket on the fuel filter with clean 15W-
40 oil.
Fill the fuel filter with clean fuel.
Screw the fuel filter onto the filter head until the
gasket contacts the filter head surface.
Tighten the filter an additional 1/2 to 3/4 turn.
14-12