TM 10-3950-672-24-2
Fuel Drain Manifold - Replacement
10mm
Remove the capscrews from the hold-down clamps and
complete the following steps.
10mm
Remove the banjo fitting screws and washers.
10mm
Disconnect the drain line fittings.
Inspect drain line for cracks and other damage.
Inspect rubber sealing surfaces for leak paths.
Replace any rubber seals that are damaged.
NOTE
Lubricate seals with clean engine oil
to aid in installation.
Assemble the drain line and fuel drain manifold in the
reverse order of disassembly.
Note: Use new seals for the fittings.
5-92