TM 10-3950-672-24-2
Injector Bore Brush
Clean the injector nozzle bore.
Assemble the injector and new copper sealing washer.
Use Only One Copper Washer.
Apply a coat of anti-seize compound to the threads of
the injector hold-down nut and between the top of the
nut and injector body.
24mm Deep Well Socket
Caution: Align the injector's protrusion with the
notch in the bore.
Torque Value: 60 N [44 ft-lbs]
m
Note: The current Bosch injector has an o-ring
located above the hold down nut. After tightening
the injector be sure to push the o-ring into the
groove.
5-96