TM 10-3950-672-24-2
Assemble the fuel drain manifold and high pressure
lines. Leave the high pressure fittings loose at the
injectors.
17mm
Warning: It is necessary to put the engine in the a
run position: Because the engine may start, be sure
to follow all the safety precautions. Use the normal
engine starting procedure.
Crank the engine to allow entrapped air to bleed from
the lines. Tighten the fittings.
Electric Fuel Shut Off Valve - Replacement
8mm
Remove the electrical wire and complete the following
steps.
Clean around the valve.
5-97