TM 10-3950-672-24-2
Look the engine over closely, and cover all openings
with tape to prevent dirt and moisture from entering.
Install a warning tag which alerts others of no oil in the
engine and that it must not be started.
Store the engine in a dry area of even temperature.
Rotate the crankshaft two to three revolutions every 3 to
4 weeks use the barring gear, Part No. 3904682 to
rotate the crankshaft.
Removing the Engine from Short-Term storage
Remove the tape from all openings, and remove the
warning tag.
Refill the oil filters with clean 15W-40 oil, and prime the
lubrication system. Refer to Engine Dynamometer Test
Engine Run-in (14-02).
the fuel system, and fill the fuel filter again.
Connect the electrical wiring to the fuel pump solenoid.
Prime and vent the fuel system.
5-340