TM 10-1670-298-20&P
2.30
WASHER WEB ASSEMBLY.
This task covers:
a.
Inspect b.
Repair c.
Replace
INITIAL SETUP
Tools
References
Paragraph 2.8
Paragraph 2.9
Materials/Parts
Washer Web Assembly (Appendix C)
Equipment Condition
Parachute compartment assembly removed.
M5 cartridge-actuated release assembly removed.
Tail cone assembly removed.
INSPECT
Conduct a technical/rigger-type inspection In accordance with the Instructions contained in paragraph 2 9.
REPAIR
a.
Restitching. Restitch the washer web assembly according to original construction, instructions contained in
paragraph 2.8, and the specifics shown in Table 2-3.
b. Splicing. Splicing shall be accomplished using the instructions in paragraph 2.8
REPLACE
NOTE
The washer web assembly may be replaced using the instructions contained in paragraph 2.28 above.
Replace an unserviceable washer web assembly with a serviceable items from stock.
2-70
