TM 10-1670-298-20&P
2.31
PARACHUTE COMPARTMENT ASSEMBLY.
This task covers:
a.
Inspect b.
Replace
INITIAL SETUP
Tools
References
Paragraph 2.9
Materials/Parts
Parachute compartment assembly (Appendix C)
Cotter pin (Appendix C)
Equipment Condition
Tail cone assembly removed.
Cable release system removed.
M5 cartridge-actuated release assembly removed.
Web assemblies removed.
INSPECT
Conduct a technical/rigger-type inspection in accordance with the instructions contained in paragraph 2.9
REPLACE
a. Remove and discard cotter pins from the four pin assemblies (Figure 2-36).
b. Unlock pin assemblies and remove defective parachute compartment assembly.
2-72
