b. Cleaning and Inspection.
(3) Install rear wheels (TM 10-3950-203-20).
(1) Clean all parts.
3-21. Front Wheel Drive Shaft and Brake Drum
(2) Inspect for cracks and other defects.
Replace defective parts as necessary.
a. Removal.
c. Reassembly and Installation.
(1) Remove front wheel (TM 10-3950-203-
(1) Refer to figure 3-16 to reassemble and)
20
install rear axle spindle and related parts.
(2) Remove front wheel drive shaft and brake
(2) Install steering cylinder (TM 10-3950-
drum as shown in figure 3-17.
203-20).
3-28
