(5) Position accessory boxes on flatcar and
(4) Lift the crane shovel (on signal) and swing it
over flatcar then lower and position it as shown on
secure as illustrated on figures 2-1 and 2-2. Refer to
Section 1 (General Rules) and the applicable figure(s) in
figures 2-1 or 2-2.
Section 4 of the Association of American Railroads
Rules governing the loading of commodities on open top
g. Preparation for Storage and Shipment.
cars for detailed instructions.
(1) Prepare crane shovel for temporary
(6) Load and secure front end attachments in
storage as directed in TM 740-93-1.
the manner shown on figure 2-3. Refer to Section 1
(2) Remove anti-rotation bars from their
(General Rules) and the applicable figure(s) in Section 4
stowed position (fig. 2-20), and install (fig. 2-21), to
of the Association of American Railroads Rules
prevent cab and platform movement.
governing the loading of commodities on open top cars
(3) Remove floodlights (para 3-170) and pack
for detailed instructions.
them in a box, protected by ample quantities of
cushioning material.
2-6. Reinstallation After Movement
(4) Install blocks, cribbing, hold-downs, and
wedges as shown on figures 2-1 and 2-2. Refer to
For installation after movement instructions, refer to
Section 1 (General Rules) and the applicable figure(s) in
Section 4 of the Association of American Railroads
Rules Governing the loading of commodities on open
top cars for detailed instructions.
Section III. CONTROLS AND INSTRUMENTS
instruments and provides operator/crew sufficient
2-7. General
information to insure proper operation of the crane-
shovel.
This
section
describes
the
various
controls
and
Figure 2-21. Anti-rotation bars, installed.
2-21
