TM 5-3810-206-35
(3) Install oil pan by reversing procedure in
steps (1) and (2) above.
(3) Remove capscrews (5), lockwashers (4),
b. Disassembly and Reassembly.
plate (6) and gasket (3).
(1) Remove six capscrews (2, fig. 3-47),
(4) Install oil pan and plate by reversing the
lockwashers (3), and baffle plate (4).
procedures in steps (1) through (3) above.
(2) Remove pipe plug (8) from oil pan (7).
b. Cleaning, Inspection, and Repair.
Clean,
(3) Reassemble by reversing procedure in steps
inspect, and repair oil pan and plate in manner described
(1) and (2) above.
in paragraph 3-43c above.
c. Cleaning, Inspection, and Repair.
(1) Clean all parts and dry thoroughly before
3-45.
Oil Pump and Pressure Relief Valve (Engine
inspecting or reassembling the oil pan.
Model 687C-18-ES)
(2) Inspect mounting hardware for burs or
stripped threads. Inspect baffle plate and pan for bent,
a. Removal and Installation.
cracked or broken condition. Inspect plug for burs.
(1) Remove oil pan (para 3-43).
(3) Repair by straightening bends, welding
(2) Remove retaining ring (15, fig. 3-39) from
cracks or breaks, or replacement.
gear (14).
(3) Use a puller and remove gear (14) from oil
pump shaft.
3-44.
Oil Pan and Plate for Engine Model D333TA
(4) Remove two capscrews (3 and 5, fig. 3-49),
a. Removal and Installation.
lockwashers (2) and elbow (4).
(1) Remove engine (para 2-9).
(5) Remove elbow (4) and pipe (6) from oil
(2) Remove capscrews (7, 8, and 9, fig. 3-48),
pump and strainer (10).
lockwashers (4), oil pan (1), and gasket (2) from
KEY to fig. 3-48:
1
Oil pan
4
Lockwasher
6
Plate
8
Capscrew
2
Gasket
5
Capscrew
7
Capscrew
9
Capscrew
3
Gasket
Figure 3-48. Oil pan and plate, exploded view.
3-59
