TM 5-3810-206-35
KEY to fig. 5-10:
1
Track shoe (80 rqr)
4
Bushing (80 rqr)
7
Master pin (4 rqr)
9
Nut (320 rqr)
2
Shoulder bolt (320 rqr)
5
Thrust washer (8 rqr)
8
Link pin (76 rqr)
10
Tread assembly
3
Side bar, L.H. (80 rqr)
6
Side bar, R.H. (80 rqr)
Figure 5-10. Crawler track, disassemble and reasessembly.
(6) Lift swing gear carefully into place on top of
(10) Install propelling gear ol pan, propel chain,
i
frame.
and upper track support rollers (TM 5-3810-206-12).
(7) Install sleeve nuts (9), bolts (55 and 56),
lockwashers (10), and nuts (11).
Note. Install wearing plates (53) if
(8) Install horizontal propelling shaft (para 5-13).
they were removed.
Be sure shims (33 and 34, fig. 5-6) are assembled in
same position as removed, then install bearing caps (21,
(11) Install revolving frame (para 2-10).
35, and 39).
(12) Lubricate (LO 5-3810-206-12).
(9) Install bolts (32), lockwashers (40), and nuts
(41).
5-13
