TM 5-3810-207-20/TO 36C23-3-37-12Figure 94. Tag line winder, partially exploded view.(2)Install the cable to tag line winder drum(TM 5-3810-207-10).171.Boom Cradlea.Removal.Remove the boom cradle asinstructed on figure 95.b.Cleaning, Inspection, and Repair.(1)Clean all parts with an approved cleaningsolvent.(2)Inspect all parts for breaks, bends,excessive wear, and other damage.Repair or replace all parts as necessary.c.Installation.Install the boom cradle asillustrated on figure 95.172.Radius Indicatora.Removal and Disassembly.Remove anddisassemble the radius indicator in the numericalsequence as instructed on figure 96.b.Cleaning, Inspection, and Repair.(1)Clean all parts with an approved cleaningsolvent.(2)Inspect all parts for breaks, excessivewear, and other damage. Repair orreplace all defective parts as necessary.c.Reassembly and Installation.Reassemble andinstall the radius indicator in the reverse of thenumerical sequence as illustrated on figure 96.173.Jib Booma.Removal.Remove the jib boom from the craneboom (TM 5-3810-207-10).b.Disassembly.Disassemble the jib boom innumerical sequence as illustrated on figure 97.c.Cleaning, Inspection, and Repair.(1)Clean all parts with an approved cleaningsolvent.(2)Inspect all parts for breaks, bends,excessive wear, and other damage.Repair or replace all parts as necessary.d.Reassembly.Reassemble the jib boom inreverse numerical sequence as illustrated on figure 97.e.Installation.Install the jib boom on the craneboom (TM 5-3810-207-10).136
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
