TM 5-3810-207-20/TO 36C23-3-37-12
Figure 102. Back hoe bail block, exploded view.
the back hoe boom and remove the hoe
boom mast.
b.
Disassembly. Disassemble the back hoe boom
mast in the numerical sequence as illustrated on figure
103.
c.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect all parts for breaks, bends,
excessive
wear,
and
other
damage.
Repair or replace all defective parts as
necessary.
d.
Reassembly. Reassemble the back hoe boom
mast in the reverse numerical sequence as illustrated on
figure 103.
e.
Installation.
(1)
Position the back hoe boom mast on the
back hoe boom and secure with the two
pins and setscrews.
(2)
Install the back hoe assembly on the
revolving frame (TM 5-3810-20710).
180.
Back Hoe Boom
a.
Removal.
(1)
Remove the back hoe assembly from the
revolving frame (TM 5-3810-207-10).
(2)
Remove the back hoe handle and bucket
from the boom (par. 178).
144
