TM 5-3810-207-20/TO 36C23-3-37-12Figure 96. Radius indicator, removal, disassembly,reassembly and installation.174.Jib Boom Masta.Removal.Remove the jib boom mast from thejib boom (TM 5-3810-207-10).b.Disassembly.Disassemble the jib boom mast innumerical sequence as illustrated on figure 98.c.Cleaning, Inspection, and Repair.(1)Clean all parts with an approvedcleansing solvent.(2)Inspect all parts for breaks, bends,excessive wear, and other damage.Repair or replace all parts as necessary.d. Reassembly.Reassemble the jib boom mast inreverse numerical sequence as illustrated on figure 98.e. Installation.Install the jib boom mast on the jibboom (TM 5-3810-207-10).175.Catwalka.Removal.Remove the catwalk from the pileleads and revolving frame (TM 5-3810-207-10).b.Disassembly. Disassemble the catwalk asinstructed on figure 99.c.Cleaning, Inspection, and Repair.(1)Clean all parts with an approved cleaningsolvent.(2)Inspect the catwalk for bends, cracks,breaks, and damaged condition.Straighten bends, weld breaks and cracks,or replace defective catwalk.d.Reassembly.Reassemble the catwalk asillustrated on figure 99.e.Installation.Install the catwalk on the revolvingframe and pile leads (TM 5-3810-207-10).138
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
