TM 5-3810-207-20/TO 36C23-3-37-12
Figure 122. Starter solenoid assembly, removal and installation.
204. Starter Assembly
a.
Removal. Remove the starter assembly as
instructed on figure 123.
b.
Cleaning and Inspection.
(1)
Clean the starter assembly with an
approved
cleaning
solvent
and
dry
thoroughly.
(2)
Inspect the starter assembly for proper
operation. Replace a defective starter as
necessary.
c.
Installation.
Install
the
starter
assembly
instructed on figure 123.
d.
Test. Test the starter assembly in a similar
manner as described in paragraph 77.
205. Starter Brushes
a.
Removal.
(1)
Remove the starter (par. 204).
(2)
Remove the brushes in a similar manner
as described in paragraph 78.
b.
Cleaning and Inspection. Clean and inspect the
starter brushes (par. 78).
c.
Installation.
(1)
Install the starter brushes (par. 78).
(2)
Install the starter (par. 204).
206. Generator
a.
Removal. Remove the generator in a similar
manner as described in paragraph 72.
b.
Cleaning and Inspection. Clean and inspect the
generator (par. 72).
c.
Installation. Install the generator (par. 72).
207. Generator Brushes
a.
Removal. Remove the generator brushes in a
similar manner as described in paragraph 72.
b.
Cleaning and Inspection. Clean and inspect the
generator brushes (par. 72).
c.
Installation. Install the generator brushes (par.
72).
d.
Test. Test the generator (par. 72).
164
