TM 5-3810-207-20/TO 36C23-3-37-12Figure 112. Thermocouple, removal and installation.191. Distributor Switcha.Removal. Remove the distributor switch andbracket as instructed on figure 114.b.Cleaning, Inspection, and Repair.(1)Clean the distributor switch and bracketwith a cloth dampened with an approvedcleaning solvent and dry thoroughly.(2)Inspect the distributor switch for properoperation. Replace a defective distributorswitch.(3)Inspect a mounting hardware for damage.Repair or replace damaged hardware asnecessary.c.Installation. Install the distributor switch andbracket as illustrated on figure 114.192. Oil Pan Shrouda.Removal.(1)Remove the thermocouple (par. 189).(2)Remove the oil pan shroud as instructedon figure 115.b.Cleaning, Inspection, and Repair.(1)Clean the oil pan shroud with an approvedcleaning solvent.(2)Inspect for bends, breaks, and otherdamage. Repair or replace damaged oilpan shroud as necessary.(3)Inspect hardware for damage. Replacedamaged hardware.c.Installation.(1)Install the oil pan shroud as illustrated onfigure 115.(2)Install the thermocouple (par. 189).193. Heater Switchboxa.Removal. Remove the heater switchbox asinstructed on figure 116.b.Disassembly. Disassemble the heater switchboxin the numerical sequence as illustrated on figure 117.c.Cleaning, Inspection, and Repair.(1)Clean all parts with an approved cleaningsolution and dry thoroughly.154
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
