TM 5-3810-207-20/TO 36C23-3-37-12(2)Remove the high beam indicator lightassembly as instructed on figure 125.b.Cleaning and Inspection.(1)Clean the high beam indicator lightassembly with a cloth dampened with anapproved cleaning solvent and drythoroughly.(2)Inspect the high beam indicator lightassembly for proper operation. Replace adefective high beam indicator lightassembly.c.Installation.(1)Install the high beam indicator lightassembly as illustrated on figure 125.(2)Install the lamp (TM 5-3810-207-10).226. Horn Button Assemblya.Removal.Remove the horn button assembly asinstructed on figure 126.b.Cleaning and Inspection.(1)Clean the horn button assembly with a clothdampened with an approved cleaningsolvent and dry thoroughly.(2)Inspect the horn button assembly for properoperation. Replace a defective horn buttonassembly as necessary.c.Installation.Install the -horn button assembly asillustrated on figure 126.227. Cab and Chassis Wiring Harness RepairInspect and repair carrier cab and chassis wiringharness in a similar manner as for crane cab wiringharness (par. 89).228. Blackout Stoplighta.Removal. Remove the blackout stoplight asinstructed on figure 127.b.Disassembly.Disassemble the blackout stoplightas illustrated on figure 128.A-Horn buttonFigure 126. Horn button assembly.171
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
