TM 5-3810-207-20/TO 36C23-3-37-12
236. Slave Receptacle
a.
Removal.
Remove the slave recycle as
instructed on figure 139.
b.
Cleaning and Inspection.
(1)
Clean
the
slave
receptacle
with
an
approved
cleaning
solvent
and
dry
thoroughly.
(2)
Inspect for breaks, bends, and proper
operation Replace a damaged or defective
slave receptacle.
c.
Installation.
Install a slave receptacle as
illustrated on figure 139.
237. Stoplight Switch
a.
Removal. Remove the stoplight switch as
instructed on figure 140.
b.
Cleaning and Inspection.
(1)
Clean the stoplight switch with an approved
cleaning solvent and dry thoroughly.
(2)
Inspect the stoplight switch for proper
operation. Replace a defective stoplight
switch.
c.
Installation. Install the stoplight switch as
illustrated on figure 140.
238. Turn Signal Switch
a.
Removal.
(1)
Remove the horn button (par. 226).
(2)
Remove steering wheel (par. 278).
(3)
Remove the turn signal switch as instructed
on figure 141.
b.
Cleaning and Inspection.
(1)
Clean all parts with a cloth dampened with
an approved cleaning solvent and dry
thoroughly.
(2)
Inspect all parts for wear, breaks, and other
damage. Replace worn and damaged parts
as necessary.
c.
Installation.
(1)
Install the turn signal switch as illustrated
on figure 141.
(2)
Install steering wheel (par. 278).
(3)
Install the horn button (par. 226).
Figure 132. Front blackout headlight, exploded view.
176
