Figure 113. Swing brake, removal and installation.
193. Swing Broke and Linkage
a. Adjustment. The swing brake is not designed
for adjustment.
b. Removal and Installation. Remove and install
swing brake as shown in figure 113.
c. Cleaning and Inspection.
Figure 112. Hoist brakeband adjustment,
(1) Clean all parts in an approved cleaning
removal and installation.
solvent.
(2) Inspect brake lining for excessive wear,
192. Hoist Brakebands
glazing, and other damage. Replace a
brakeband having defective lining.
a. Adjustment. Adjust hoist brakebands as shown
(3) Inspect all parts for breaks, excessive
in figure 112.
wear, and other damage. Replace all
b. Removal and Installation. Remove and install
defective parts.
the brakebands as shown in figure 112.
c. Cleaning and Inspection.
194. Cab Lock Assembly
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
a. Removal and Installation. Remove and install
(2) Inspect the lining for excessive wear,
cab lock assembly as instructed on figure 114.
glazing and other damage. Replace a
b. Cleaning, Inspection, and Repair.
brakeband having defective lining.
(1) Clean all parts with an approved cleaning
(3) Inspect all other parts for excessive wear,
solvent.
breaks, and other damage. Replace parts
(2) Inspect all parts for breaks, bends,
and brakeband as necessary.
excessive wear, and other damage.
Repair or replace parts as necessary.
AGO 6819A
137
