Section XVIII. PRIMARY DRIVE ASSEMBLY AND GEAR GUARDS
Note.
195. General
The primary drive chain assembly is inclosed by the
Before removal of drive chain case
drive chain case cover.
The input sprocket and
cover, drain the oil from the chain
countershaft sprocket are connected by a multi-strand
case.
roller drive chain.
b. Removal and Installation. Remove and install
196. Primary Drive Chain Case Cover, Drive Chain,
the drive chain case cover, drive chain, and drive gear
and Drive Gear
as instructed in figure 115.
a. Adjustment. Adjust the drive chain as instructed
c. Cleaning and Inspection.
in figure 115.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect all parts for breaks, cracks, and
other damage. Replace defective parts.
197. Gear Guards and Chain Guards
a. Removal and Installation. Remove and install
guards as instructed in figure 116.
Figure 114. Cab lock assembly, removal and
Figure 115. Primary drive chain case cover, drive
installation.
chain, and drive gear, removal and installation.
AGO 6819A
138
