Figure 290. Carrier engine oil pan, removal and
installation.
427.
Carrier Engine Oil Pan Removal and
Disassembly
a. Removal.
(1) Drain the crankcase.
(2) Remove the handhole cover and gage rod.
(3) Remove the carrier engine oil pan as
instructed on figure 220.
b. Disassembly. Disassemble the carrier engine oil
pan in numerical sequence as illustrated on figure 221.
428. Carrier Engine Oil Pan Cleaning, Inspection and
Repair
a. Cleaning. Clean all parts with an approved
Figure 221. Carrier engine oil pan, exploded view.
cleaning solvent and dry thoroughly.
b. Inspection and Repair. Inspect all parts for
b. Installation.
excessive wear or damage.
Replace or repair all
(1) Install the carrier engine oil pan as
defective parts.
illustrated on figure 220.
429.
Carrier Engine Oil Pan Reassembly and
(2) Install the handhole cover and gage rod.
Installation
a.
Reassembly.
Reassemble the carrier
(3) Fill the crankcase.
engine oil pan in the reverse of the numerical sequence
as illustrated on figure 221.
AGO 6819A
242
