b.
Installation.
cover to attain proper bearing pre-load. When gear
backlash is not specified on gear, set backlash to 0.006
(1) Install the carrier rear axle differential
to 0.012 inch. Replace gears in pairs. Replace or repair
assemblies as illustrated on figure
all damaged or defective parts.
(2) Connect the equalizer beams (para.
569.
Carrier Rear, Rear Axle Differential
(3) Connect the torque rods (para. 561).
Assemblies, Reassembly and
(4) Install the rear axle (para. 227).
Installation
(5) Fill the two axle housings.
a.
Reassembly. Reassemble the carrier rear
axle differential assemblies in reverse of numerical
sequence as illustrated on figure 271.
AGO 6819A
301
