TM 5-3810-231-12
(2) Remove fluid pump drive belt as
(2) Inspect the drive belt for cracks, breaks, and
instructed on figure 51.
frayed or stretched condition. Replace a
defective belt.
b. Cleaning and Inspection.
c. Installation.
(1) Clean the drive belt with
a
cloth
dampened with an approved cleaning
(1) Install water pump drive belt as shown in
solvent.
(2) Inspect the belt for cracks, breaks, and
(2) Adjust drive belt tension (para 39).
frayed or stretched condition. Replace a
(3) Install fluid pump drive belt (para 97).
defective belt.
c. Installation.
99. Engine Alternator
(1) Install fluid pump drive belt as instructed
a. Removal.
on figure 51.
(1) Remove water pump drive belt (para 98).
(2) Install crane alternator drive belts (para
(2) Remove alternator drive belt as shown in
98. Water Pump Drive Belt
b. Cleaning and Inspection.
(1) Clean drive belt with a cloth dampened
a. Removal.
with an approved cleaning solvent.
(1) Remove fluid pump drive belt (para 97).
(2) Inspect the drive belt for cracks, breaks,
(2) Remove water pump drive belt as shown
and frayed or stretched condition. Replace a
in figure 51.
defective belt.
b. Cleaning and Inspection.
c. Installation.
(1) Clean the drive belt with a cloth
(1) Install alternator drive belt as shown in figure
dampened with an approved cleaning
solvent.
(2) Install water pump drive belt (para 98).
Section XIII. ENGINE FLUID PUMP
100. General
The engine fluid pump is used to circulate the
fuel oil from the fuel tanks through the aftercooler and
torque converter to cool the torque converter.
101. Fluid Pump
a. Removal. Remove the engine fluid pump as
instructed in figure 52.
b. Cleaning and Inspection.
(1) Clean the pump with a cloth dampened in
an approved cleaning solvent.
(2) Inspect for cracks, breaks or other
damage.
(3) Replace a damaged or defective fluid
Figure 52. Engine fluid pump, removal and installation
pump.
c. Installation. Install the engine fluid pump as
instructed on figure 52.
84
