TM 5-3810-231-12
Figure 62. Boom hoist brake adjustment, removal and installation.
114.
Swing Brake Band
c. Removal. Remove the boom hoist brake band
as shown in figure 62.
a. Adjustment.
Adjust swing brake band as
d. Cleaning and Inspection.
instructed on figure 63.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
b. Removal.
Remove swing brake band as
instructed on figure 63.
(2) Inspect the lining for excessive wear,
glazing and other damage. Replace a
c. Cleaning and Inspection.
brake band having a defective lining.
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
e. Installation.
Install the boom hoist brake as
shown on figure 62.
(2) Inspect the lining for excessive wear,
glazing and other damage. Replace a
92
