B-Engine rear mount, installed view
Figure 2-4. (2) Continued
b. Installation.
(12) Install the deck plates over engine TM 5-
3810-232-12).
(1) Install the torque converter assembly to
(13) Attach radiator hoses and fill the cooling
the engine (para 5-2).
system (TM 5-3810-232-12).
(2) Install the carrier engine assembly as
illustrated on figure 2-4.
(3) Connect the universal joint between torque
2-11. Carrier Transmission Assembly
converter and transmission (para 5-4).
a. Removal.
(4) Connect the transmission control (para 5-
(1) Remove the propeller shafts (para 5-4).
(2) Disconnect the transmission control (para
(5) Connect the air compressor lines (TM 5-
3810-232-12).
(3) Remove the transmission assembly as
instructed on figure 5-5.
3810-232-12).
b. Installation.
(7) Install the air cleaner, duct and shroud
(1) Install the transmission assembly as
(TM 5-3810-232-12).
instructed on figure 5-5.
(8) Connect the engine wiring.
(2) Connect the transmission control (para 5-
(9) Connect the throttle linkage (TM 5-3810-
232-12).
(3) Install the propeller shafts (para 5-4).
(10) Connect the fuel line.
(11) Connect the battery cables.
2-11
