e.
Push piston and connecting rod from
cylinder liner with a wooden stick.
f.
Reassemble connecting rods, caps, bolts and
nuts as they are taken out. These parts are not
interchangeable;
number
each
assembly
for
identification.
g. Tape bearing halves together and identify by
cylinder number as removed.
h. Refer to figure 4-24 and remove piston pin
snap rings and remove piston pins.
Figure 4-23. Crane engine connecting rod and piston
assembly, removal end installation.
Figure 4-24. Crane engine connecting rod and piston assembly, exploded view.
1 Connecting rod
4 Lockplate
7 Ring
10 Piston
2 Bolt
5 Nut
8 Ring
11 Pin
3 Bushing
6 Bearing
9 Ring
12 Ring
4-32
