c. Disassembly. Disassemble the axle oscillate
Key to Figure 5-44.
1
Setscrew
lockout cylinder in the numerical sequence shown in
2
Threaded washer
d. Cleaning, Inspection and Repair.
3
Wiper
4
Nut
(1) Clean all metal with an approved
5
Piston half
cleaning solvent and dry thoroughly.
6
O-ring
(2) Inspect rod, pistons and cylinder for
7
Nylon rider
cracks, scoring, or excessive wear. Repair or replace
8
Packing assembly
defective parts.
9
Washer
(3) Inspect packing, O-rings and seals.
10
Packing assembly
Replace as necessary.
11
Nylon rider
e. Reassembly. Reassemble the axle oscillate
12
O-ring
lockout cylinder in reverse of the numerical sequence
18
Piston half
shown on figure 5-44.
14
Rod
f. Installation. Install front axle oscillate lockout
15
Packing assembly
cylinder (TM 5-3810-232-12).
16
Bushing
17
Parbak ring
18
O-ring
19
Retainer
20
Parbak ring
21
O-ring
22
Shell assembly
5-94
