c. Cleaning, Inspection and Repair.
Key to Figure 5-48.
1. Motor assembly
(1) Clean all metal parts with an approved
2. Fitting, nut
cleaning solvent and dry thoroughly.
3. Fitting, body
(2) Inspect heater core for cracks, breaks,
4. Silencer, exhaust
corrosion or signs of leakage.
Repair or replace
5. Cover
defective heater core.
6. Washer, felt
(3) Inspect blower motor and fan for general
7. Cylinder
conditions.
Repair or replace defective parts as
8. Plate & bushing assy.
necessary.
9. Screw
(4) Inspect housing and hardware for cracks,
10. Washer, steel
breaks, and other damage. Repair or replace defective
11. Washer, leather
parts necessary.
d. Reassembly. Reassemble heater in reverse of
12. Nut
13. Driver
numerical sequence shown on figure 5-47.
14. Washer, lock
e. Installation. Install heater assembly (TM 5-3810-
15. Nut, cap
232-12).
16. Blade, wiper
17. Arm, wiper
5-39. Windshield Wiper Motor
18. Valve, control
a. Removal. Remove wiper motor (TM 53810-
19. Shaft and gear assembly
232-12).
20. Piston assembly
b. Disassembly.
Refer to figure 5-48 and
21. Stop, valve
disassemble wiper motor as illustrated.
22. Valve, head
23. Gasket
24. Screw
25. Plate, end
5-101
