CHAPTER 6
CRANE ASSEMBLY REPAIR INSTRUCTIONS
Section I. CRANE ENGINE CLUTCH ASSEMBLY
6-1. General
6-2. Crane Engine Clutch Assembly
a. Removal.
The crane engine is equipped with a friction-type clutch
assembly that is enclosed within its own housing and is
(1) Remove the primary drive chain guard and
bolted to the engine flywheel housing. Engagement and
drive chain (TM 5-3810-232-12).
disengagement of the clutch is by lever. The friction
(2) Remove the engine clutch assembly and
plate is engaged by splines into a driving ring bolted to
the master clutch control assembly as instructed on
the flywheel.
A-Clutch housing
Figure 6-1. (1) Crane engine clutch assembly, removal and installation.
6-1
