SECTION II
CONTROLS AND OPERATION
SECTION II
CONTROLS AND OPERATION
1. IGNITION INDICATOR. This lamp is illuminated
CARRIER CONTROL IDENTIFICATION
whenever the ignition switch is in the ON position. If the
lamp remains lit after the carrier ignition switch is placed
The instruments and controls in the cab of the carrier are
in the OFF position, the upper ignition switch is in the ON
shown in Figure 2-1. The numbers on this figure
position, and must be placed in the OFF position to shut
correspond to the numbers on the following list, which
down the ignition system.
identifies the controls and describes their function.
2.
HIGHBEAM INDICATOR.
This lamp, when
Before attempting to operate this machine, the operator
illuminated, indicates that the high headlight beams are
should study carefully all of the information in this section
on.
and in Catalog 221. The operator should become
thoroughly familiar with the location and purpose of each
3. VOLTMETER. The voltmeter measures the voltage
control on the machine.
produced by the alternator and indicates the condition of
the battery. See Figure 2-2 for an explanation of the
voltmeter readings.
Figure 2-1. Carrier Controls
1-2-1
