FLOW DIVIDERS
SUB-SECTION 5D
DISASSEMBLY. To disassemble the flow divider, proceed
3. Wash all parts in a clean mineral oil solvent.
as foIlows (see Figure 5D-4):
1. Remove the plugs at each end of the flow divider.
REASSEMBLY. Reassemble the flow divider in the reverse
order of disassembly. Be sure to lubricate the piston sub-
2. Carefully push the piston sub-assembly out on. end of
assembly with clean hydraulic oil before it is installed in the
the body. Do not disassemble the piston sub-assembly. If
valve body.
the pistons are worn or damaged, the entire sub-assembly
should be replaced.
Figure 5D-4. Flow Divider (36Q46)
5D-4