OUTRIGGER SYSTEM
SECTION VII
INSTALLATION. To install the safety lock, proceed as
1. Remove the air hose from the air cylinder.
follows:
2. Remove the cotter pin and pin (1).
1. Place ratchet pin (7) in place and install pin (8).
2. lnstall the keeper plate (9) to lock the pin.
3. Remove the cotter pin and pin from rod end (6). The air
cylinder can now be removed.
3. Place the air cylinder in position and insert mounting
pin (1) through the outrigger bracket and mounting on the
4. Remove ratchet pin keeper plate (9).
cylinder. Fasten pin with a cotter pin.
4. Position rod end (6) on the ratchet pin and fasten it
5. Remove pin (8). It may be necessary to drive the pin out
with the washer, pin and cotter pin.
with a brass bumping bar. Ratchet pin (7) can now be
5. Connect the air hose.
removed.
7-10
