3-15. Radiator Service
3-16. Distributor Service
a. Refer to figure 3-5, and service the radiator.
Service is not normally necessary for the distributor
assembly. However, if the engine should fail to start, or if
Add clean water to bring the level to 3/4 inch above the
the distributor has become wet, remove the cover
baffle plate, if necessary.
illustrated in figure 3-6 and dry the interior of the
Caution: Turn radiator cap slowly and allow
distributor cap and the points with a clean dry lint-free
pressure to escape before removing it.
cloth. Inspect the distributor cover for cracks or damage.
b. Refer to TB 750-651.
for instruction
Inspect the rotor for cracks or damage. Inspect the
concerning amount of antifreeze for cold weather
points for excessive pitting or corrosion.
Report
operation.
deficiencies to organizational maintenance.
Figure 3-6. Distributor service.
Figure 3-5. Radiator service
3-9
