TM 5-3810-294-34
Section V. REPAIR OF REAR DRUMSHAFT
5-25. Description
methods of attaching the various front end attachments will
necessarily change. These changes are described in TM 5-
The rear drumshaft is used for the secondary load line in
3810-294-10.
crane type applications, and as the host drum for digging
5-26. Removal
applications. It is chain driven from the boom hoist shaft
Refer to paragraph 2-15 and remove the rear drumshaft
by a double-strand roller chain, which is enclosed in the
assembly.
rear drumshaft drive chaincase on the left rear of the
5-27. Disassembly
crane, (refer to fig. 5-1 ). The lagging is of the split type
to allow for easy replacement when switching to the
one of the illustration shows the drumshaft as arranged for cran
special lagging used for shovel operation. The type of
type operation. Part two shows it as arranged for shovel
lagging on the drumshaft does not change the
operation. Disassemble the rear drumshaft as follows:
disassembly and reassembly procedures, but the
5-14
