TM5-3810-305-10
Keep all parts of body and tools
away from moving cable. Fail-
ure to follow this procedure
could cause DEATH or serious
injury.
Never allow boom or load to
swing into power lines. If the
crane must be operated in the
vicinity of power lines, follow
these safety precautions:
l Contact the power company and have
all power lines and ground wires turned
off.
l Never allow any portion of the
equipment, including cable, hook block,
lines and load, closer to power lines
than the distances shown on the
Electrical Warning (Danger) Decal.
l Know the maximum height and reach
of the crane and erect a suitable
barricade around all power sources.
l Warn all personnel in the work area of
the power source and electrocution
hazard.
l If contact with a power source does
occur, DO NOT STEP OFF THE
CRANE. Stay on the vehicle until the
power is turned off or the equipment is
lowered and clear of the power source.
l If fire or other conditions force the
operator to leave the crane, jump off
and away, keeping all parts of the body
clear of the equipment.
Failure to follow these proce-
dures could cause DEATH
serious injury.
Diesel fuel and other combustible
materials are used in the opera-
tion and maintenance of this
equipment. Do not smoke or
allow open flames in areas where
combustible materials are stored
or used. Failure to follow this
procedure could cause DEATH
or serious injury.
No personnel are permitted on
the deck while rotating upper-
structure. Failure to follow this
procedure could cause DEATH
or serious injury.
Improperly attached wire rope
terminals lead to serious or
possibly unsafe conditions.
Failure to follow this procedure
could cause DEATH or serious
injury.
1-32
