TM5-3810-305-10
All safety procedures and criteria
established are the MINIMUM
requirements for use of a work
platform on the LRT 110 Crane.
Applicable government and
industry standards must also be
adhered to. Failure to follow this
procedure could cause DEATH
or serious injury.
Never use a work platform if
inspection indicates a structural
or mechanical fault of any kind.
Failure to follow this procedure
could cause DEATH or serious
injury.
No personnel are permitted on
the work platform during the
performance of any test. Do not
allow personnel on work plat-
form if any test procedure indi-
cates a malfunction in equip-
ment. Failure to follow this
procedure could cause DEATH
or serious injury.
No operations with a work
platform are authorized “on
tires.” Always make certain the
LRT 110 Crane is on a stable
surface with the outriggers fully
extended. Failure to follow this
procedure could cause DEATH
or serious injury.
Never use a work platform near
energized power lines or ground
cables. Failure to follow this
procedure could cause DEATH
or serious injury.
Never allow electrically con-
nected electrode holders to
contact metal components of a
work platform. Electrode holder
contact can cause burning and/or
melting of work platform suspen-
sion which could allow the work
platform to fall. Failure to
follow this procedure could cause
DEATH or serious injury.
Dry cleaning solvent P-D-680
used to clean parts is toxic and
flammable. Use only in well
ventilated areas and avoid con-
tact with eyes, skin or clothing.
Wear the proper protective
clothing and equipment: goggles
or safety glasses, face shield and
gloves. Do not breath vapors. Do
not use near sparks or open
flames and do not smoke while
using it. Failure to follow this
procedure could cause DEATH
or serious injury.
1-35
