TM5-3810-305-10
When using U-bolt clips, ex-
treme care must be exercised to
make certain that they are at-
tached correctly. Failure to
follow this procedure could cause
DEATH or serious injury.
Failure to make a termination in
accordance with the instructions,
or failure to periodically check
and retighten to the recom-
mended torque, will cause a
reduction in efficiency rating,
which could cause DEATH or
serious injury.
Failure to install wedge sockets
in accordance with the instruc-
tions could cause DEATH or
serious injury.
Clamp the dead end close to the
socket to prevent the rope and
wedge from disengaging from
the socket. Failure to follow this
procedure could cause DEATH
or serious injury.
During the execution of this
procedure, the danger exists of
uncontrollably dropping a load.
Rotate the upperstructure to a
safe position. Failure to follow
this procedure could cause
DEATH or serious injury.
Entry of air into lowering port
will cause winch motor to cavi-
tate. The winch motor lowering
port tee must be capped to pre-
vent load from free falling when
hand pump pressure is applied.
Failure to follow this procedure
could cause DEATH or serious
injury.
When working the hand pump,
clear all personnel from the area.
Failure to follow this procedure
could cause DEATH or serious
injury.
When lowering boom to a hori-
zontal position, work from side
of upperstructure, not under
boom. Failure to follow this
procedure could cause DEATH
or serious injury.
1-33
