TM 5-3810-305-23
0022
Table 1.
Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
g. Install drain plug and add 15 gal. (56.8 L) of
hydraulic oil (TM 5-3810-305-10).
VENT PLUG
DIPSTICK CAP
M0849105
DRAIN PLUG
Figure 12.
Add Hydraulic Oil.
h. Remove drain plug and drain hydraulic oil from
reservoir.
i. Install drain plug and fill hydraulic reservoir with
23.8 gal. (90.09 L) of hydraulic oil (TM 5-3810-305-10).
j. After refilling hydraulic reservoir, it will be
necessary to bleed air from system. Open vent plug on
suction filter cover and vent until filling is complete. Close
vent plug and dipstick cap. Operate crane at part throttle
to slightly pressurize hydraulic reservoir. Then bleed out
all air by loosening vent plug. Tighten vent plug.
03/15/2011Rel(1.8)root(pmcswp)wpno(I00027)
