TM 5-3810-305-23
0022
Table 1.
Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
FILL/CHECK PLUG
DRAIN PLUGS
M0850105
Figure 14. Swing Reduction Unit Oil Change.
15
Twelve-
Drain and Clean
a. Position axle hub drain plug at "6 o'clock".
Month
Hydraulic
Check or
Reservoir
Every 1,500
to 2,000
Hours of
Service
b. Position a suitable container under axle hub
drain plug. Axle hub holds 3 qt (2.84 L).
c. Remove axle hub drain plug and drain oil
completely.
d. Install axle hub drain plug.
e. Remove axle hub fill/check plug.
f. Fill axle hub with 3 qt (2.84 L) of oil. Oil level
should be level of fill plug. If not, add oil to obtain fill plug
level. Install sealing washer and axle hub fill plug.
g. Repeat Steps a through f for remaining three
axle hubs.
h. Position a suitable container under differential
housing. Remove drain plug at the bottom of differential
housing and drain oil completely.
03/15/2011Rel(1.8)root(pmcswp)wpno(I00027)