TM 5-3810-305-23
0024
REMOVAL - Continued
Power Pack - Continued
1
4
3
2
M0206105
Figure 15.
Power Pack Removal.
WARNING
Weight of engine and transmission assembly is approximately 1,800 lb (816 kg). Use
adequate lifting equipment to lift and support engine/transmission assembly. DO NOT lift over
personnel or let personnel walk underneath suspended load. Failure to follow this warning
may cause injury or death to personnel.
NOTE
Make sure all brackets, electrical connectors, wiring harnesses, hoses, lines and cables
have been disconnected or removed from the engine and transmission assembly prior
to removal.
Use more than one person when removing engine and transmission assembly to make
sure engine and transmission DO NOT contact vehicle.
21.
Attach hoist and chains to front engine lift eye and rear transmission mounts. Gradually hoist engine and
transmission assembly up, guiding it slightly forward to clear main hydraulic pump on rear of transmission.
Move engine and transmission assembly away from carrier.
22.
Lower engine and transmission assembly onto suitable support stand.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00029)
