TM 5-3810-305-23
FIELD MAINTENANCE
INTAKE MANIFOLD COVER AND GASKET MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Sealing Compound, Thread Locking (WP 0170,
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
Table 1, Item 65) Qty: 1
75 ft-lb (WP 0171, Table 1, Item 36)
References
Materials/Parts
Cleaning Compound, Solvent, Type III (WP 0170,
Table 1, Item 9) Qty: 1
Equipment Condition
Gasket (WP 0172, Table 1, Item 78) Qty: 1
Boom in horizontal position and fully retracted (TM
5-3810-305-10)
Battery cables disconnected (WP 0076)
High-pressure fuel injection lines removed
REMOVAL
Remove eight capscrews (Figure 1, Item 1), cover plate (Figure 1, Item 2), and gasket (Figure 1, Item 3).
Discard gasket. Clean all gasket material from mounting surfaces.
2
1
3
M0053105
Figure 1. Manifold Cover Plate Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00046)