TM 5-3810-305-23
0053
REMOVAL - Continued
6.
Remove two nuts (Figure 3, Item 1), lockwashers (Figure 3, Item 2), clamp (Figure 3, Item 3), and exhaust
tube (Figure 3, Item 5) from end of muffler (Figure 3, Item 4). Discard lockwashers.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Install exhaust tube (Figure 3, Item 5) to end of muffler (Figure 3, Item 4) with clamp (Figure 3, Item 3),
two new lockwashers (Figure 3, Item 2), and nuts (Figure 3, Item 1). Do not tighten at this time.
4
3
1,2
5
M0294105
Figure 3.
Exhaust System Maintenance.
03/15/2011Rel(1.8)root(maintwp)wpno(M00059)